sábado, 1 de julio de 2017

ACTIVAR REPETIDOR DE BANDA CRUZADA EN IC-910H (HOW ACTIVE CROSS BAND REPEATER IC-910H)

Hola. Recientemente me han consultado como activar el  REPETIDOR DE BANDA CRUZADA EN IC-910H.
He hecho un corto vídeo en youtube explicándolo y ademas pongo a disposición la información.
El metodo es el siguiente:

3. How to change the cross band repeater function ON/OFF:


The following steps are how to switch between the cross band repeater mode and
normal mode:
(1) Make sure the lock function is ON before turning power OFF.
(2) Push and hold down the M/S key while turning the power on.
(3) Then enter to the cross band repeater mode. (Lock segment will flash while the cross
band repeater function is on.)
(4) Push lock key to turn the lock off to exit the cross band repeater mode.
Note:
The cross band repeater function cannot be cancelled even when the power is turned ON
and OFF.


(A cross band repeater function can be operated when the following diode is installed.
- Install the diode HD4 (1750000550 1SS355) on the DISPLAY board, as shown in the
attached diagram No.1 or No.2.)



domingo, 2 de abril de 2017

CONFIGURAR RTL2832 CON SDRuno

SDR-UNO (Configuración para utilizarlo con un RTL)

Descargar el SDRuno de la pagina web y descargar el ejecutable SDRuno_Installer1.12.2.exe e instalar. Enlace de descarga aquí:


Descargar el archivo ExtIo_RTL2832.dll de la página http://www.hdsdr.de/hardware.html y IMPORTANTE que se descargue en la carpeta "documentos" si no no podrá leerlo el instalador y no funciona.
Hay que ejecutar el ajecutable SDRunoEXTIO.exe para arrancar el EXTIO del SDR USB.
En la pestaña OPT "opciones" Select imput mirar que esté el RTL2832 selecionado.
En la pestaña OPT"opciones del panel de inicio" en modo debe estar I(left)/Q(right) en otro modo no funciona.
En la ventana de opciones PLAY STOP darle a PLAY para encender (No activa bloquear LO)
Configurar el OFFSET del RTL2832 (en mi caso (-40000000hz) debe ponerse el signo – negativo
y seleccionarlo a la derecha activanto pestaña OFFS1.
Toda la información de instalación para que funcione el RTL2832 en ésta web.
Para que funcione se ejecutará el SDRunoEXTIO.bat

Buscar la ruta de instalación para crear y ejecutar el SDRunoEXTIO.exe