sábado, 1 de julio de 2017

ACTIVAR REPETIDOR DE BANDA CRUZADA EN IC-910H (HOW ACTIVE CROSS BAND REPEATER IC-910H)

Hola. Recientemente me han consultado como activar el  REPETIDOR DE BANDA CRUZADA EN IC-910H.
He hecho un corto vídeo en youtube explicándolo y ademas pongo a disposición la información.
El metodo es el siguiente:

3. How to change the cross band repeater function ON/OFF:


The following steps are how to switch between the cross band repeater mode and
normal mode:
(1) Make sure the lock function is ON before turning power OFF.
(2) Push and hold down the M/S key while turning the power on.
(3) Then enter to the cross band repeater mode. (Lock segment will flash while the cross
band repeater function is on.)
(4) Push lock key to turn the lock off to exit the cross band repeater mode.
Note:
The cross band repeater function cannot be cancelled even when the power is turned ON
and OFF.


(A cross band repeater function can be operated when the following diode is installed.
- Install the diode HD4 (1750000550 1SS355) on the DISPLAY board, as shown in the
attached diagram No.1 or No.2.)